Search Results

Our Jet Rinse Triple-Rinsing Nozzle: The Industry’s Best Chemical Jug Rinser The Jet Rinse Triple-Rinsing Nozzle, the industry’s best chemical jug rinser. The triple-rinsing jet action removes up to 99% of residue in under a minute while the sharp point punctures both metal and plastic containers, rendering them unusable according to...

The TR2 rotary rinse nozzle is intended for tank capacities of 300 liters or more Top mounted rinse nozzles allow multiple rinses using a fraction of the tank volume. On spraying equipment the rinse volume is typically 10% of tank capacity per rinse, depending on the size and extent of boom...

Pro Clean Tank Rinse Nozzle 1/2" female hybrid threads for NPT and BSP fittings. Suitable for most spray tanks

Industry leading eduction rates, this Venturi is a great building block for bulk chemical totes or dry product handling. 2" Full port Venturi. 1/2" Fitting on Venturi body can be used to run a rinse or flush system. Eduction Rate at input flow of 46gpm@10psi is 25gpm/93lpm Eduction Rate at input flow...

Push to Activate Valve for use with tank and container rinse nozzles

The ProClean™ line of tank & container nozzles are designed for more complete & faster cleaning of empty agrochemical containers including jugs & tank The ProClean™ II Push Valve is designed to self-flush to help prevent sticking open or closed even with a heavy particulate solution ProClean™ II Push Valve is...

Push to Activate Valve with Hypro Pro-clean Tank and Container Nozzle

Model: 4001-E2H 12VDC Powered 4 Roller Pump. Viton Seals and Super Rollers, NI Resistant With Engine running and supplied with 13.5 v this pump can do: 6.8gpm at 60psi (36amps) and 8.5gpm at 40psi (22.3amps) (please see chart in photos for full details) This pump is suitable for smaller sprayers where a PTO,...

Low hydraulic consumption with high solution flow rates and pressures make this pump an excellent choice for auxiliary/continuous rinse systems and smaller spray applications. With all the legendary reliability of Hypro's Centrifugal pumps. Recommended Hydraulic Flow: 2-3 gpmMax Solution Flow: 63 gpmCan Deliver: 39 gpm at 70 psi Hydraulic motor...

Industry leading eduction rates, this Venturi is a great building block for bulk chemical totes or dry product handling. 2" Full port Venturi includes 3 flange gaskets and 1/2" Push to Connect Fitting and plug on venturi body. Fitting can be used to run a rinse or flush system. Eduction Rate at input...

Use with Express Flush Valve Assembly Or Express Retrofit Valve to direct clean out flow away from the boom to the ground or to add a circuit to recirculate contaminants back to the solution tank. Connect and disconnect tubing without tools. Meets FDA standards & NSF listed. O-ring/collet design. Body is...

Industry leading eduction rates, this Venturi is a great building block for bulk chemical totes or dry product handling. 2" Full port Venturi M220 Eduction Rate at input flow of 46gpm@10psi is 25gpm/93lpm Eduction Rate at input flow of 90gpm@50psi is 68.3gpm/258lpm 1/2" OD Push to Connect Right hand rinse port...

Clean Load Poly Venturi Eductor RH UF 220FP 11MM High Pressure/High Flow For Use With On Board Sprayer Pump Clean Load Poly Venturi Eductor RH UF 220FP 11MM High Pressure/High Flow For use with eductors on board sprayers with Centrifugal or high flow roller/diaphragm pumps 2" Full port Venturi Eduction...

Replace bent poly plumbing and worn out nozzle bodies with easy to rinse Stainless Steel plumbing and 5-way nozzle bodies ready to install. Express booms also ship with Express End Caps INCLUDING FLUSH VALVES installed for the ultimate in boom hygiene and performance. Express Boom Advantage Each Section is fully...

1/2" PTC Stem Elbow is Available to direct rinse flow away from boom. Fits all 1 inch boom lines with 10mm port size for nozzle body stems which is industry standard. Conventional boom designs trap air in the boom causing a delay from the close signal to when spray actually stops. Pentair's...

DOES NOT QUALIFY FOR FREE SHIPPING NOT REGULARLY STOCKED LONG LEAD ITEM Modular design allows flexibility in building an eduction system using multiple Cleanload Max, standard Cleanloads and auxiliary components for bulk transfer 60 gallon, full draining, cone-bottomed tank for a 20:1 ratio with 800 or 1200 gallon sprayers Translucent tank...

This Valve replaces the cap in an existing express end to quickly flush the boom section without using tools. -Compact valve design limits the length it extends beyond the last nozzle body to fit most boom structures-Chemically-resistant, stainless steel ball and viton o-rings extending life-Handle includes standard wrench square head...

Price Includes Free Shipping The Accu-Volume System puts the “Precision” in spraying by accurately measuring and displaying a “live, real time” amount of every gallon of solution within the sprayer’s tank(s). With Digital Displays being mounted, one inside the cab and another at the load station. This will give the operator...

Onboard Sprayer Eductor, Poly - (11mm), High Pressure/High Flow The Cleanload is a self-contained eduction system, which allows the operator the use of one system to mix liquid and dry chemicals safely and quickly All crop protection chemistry is mixed at ground level, ensuring the safety of both the operator and the...

The Cleanload is a self-contained eduction system, which allows the operator the use of one system to mix liquid and dry chemicals safely and quickly All crop protection chemistry is mixed at ground level, ensuring the safety of both the operator and the environment Educts 7 gallons (26.5 L) of liquid in...

Retrofit to replace plug in express end cap with robust ball valve with 1/2" PTC port for easy cleaning and maintenance. 1/2" PTC Stem elbow is available to keep rinsate off of the boom Express End Cap with flush valve benefits - Eliminates trapped air from the boom by allowing air...

Does Not Include 17mm High Flow Nozzle Body or 1/2" Stem Elbow Fits all 1 inch boom lines with 17mm port size for nozzle body stems which are typically found on John Deere Factory Stainless Steel Boom Lines. Conventional boom designs trap air in the boom causing a delay from the close...

Fits all 1 inch boom lines with 10mm port size for nozzle body stems which is industry standard. Conventional boom designs trap air in the boom causing a delay from the close signal to when spray actually stops. Pentair's Hypro Express nozzle body end caps include a passive feature that eliminates the trapped...

Fits John Deere 17mm Port Size. If you have factory installed John Deere High Flow or Stainless Steel Plumbing. You have a 17mm port size for the jumbo nozzle bodies. These 17mm express ends are the ones you need. Conventional boom designs trap air in the boom causing a delay from the...

BRS-Boom Recirculation System Retrofit Kits have been proven in the field by a wide variety of users and machine makes across North America and Australia since 2018. BRS-Boom Recirculation System Retrofit Kits modify your sprayers plumbing to allow solution to recirculate and spray through a single plumbing loop. The single plumbing loop...

Stream Jet Nozzle for Tanks up to 3M (12.7 GPM @ 20 PSI)

The OGFM40-RD Flow meter is designed to accurately and consistently measure agricultural chemicals of all viscosities and formulations without calibration adjustments from product to product. The design of this flowmeter does not require straight plumbing runs to and from the meter and can accept Flow from either direction. The remote...

The OGFM50-RD Flow meter is designed to accurately and consistently measure agricultural chemicals of all viscosities and formulations without calibration adjustments from product to product. The design of this flowmeter does not require straight plumbing runs to and from the meter. The flow can enter the meter from either side....

BRS Kit for RG900, RG1100, and RG1300 Sprayers. Kit is designed to work with all 120ft RG liquid systems with 120ft booms from 2012-2017 That have flow control at the nozzle body. Capstan or Raven PWM System, Hypro Duo-React or Pro-Stop-E. CALL 1-877-387-2636 or email sales@nozzleninja.com For more information BRS-Boom...

High productivity machines make every minute of operation that much more critical. Take your productivity to the next level with BRS boom recirculation for Patriot Sprayers Equipped with AIM COMMAND or any Nozzle Control System that turns solution flow on and off at the nozzle body. AIM COMMAND DOES NOT...

Does Not Qualify for Free Shipping Pick up in Stettler Alberta or Drop Ship Options Available The new Inductor Series is designed with flexibility in mind. The Inductor FLEX has the capacity to service todays demanding sprayer filling needs. As optimal spraying conditions are limited, it is important to keep...

ORDER ONLINE OR TO PURCHASE BY PHONE OR EMAIL PLEASE CALL 1-877-387-2636 email sales@nozzleninja.com High productivity machines make every minute of operation that much more critical. Take your productivity to the next level with BRS boom recirculation for Patriot Sprayers Equipped with AIM COMMAND or any Nozzle Control System that...

CALL 1-877-387-2636 or email sales@nozzleninja.com For more information Kit is designed to work with all 120ft-135ft New Holland Guardian Front Mount Boom Sprayers that have flow control at the nozzle body. Intellispray,Capstan or Raven PWM System or Hypro Duo-React, Pro-Stop-E. BRS-Boom Recirculation System Retrofit Kits have been proven in the...