Search Results

Pro FLow Nozzle Body 3/4" Clamp Five Way Turret EPDM

Direct replacement for major OEM 3-way Nozzle bodies for 1"(1.351"OD) boom pipe 10mm (3/8") stem/portsize Square Lug Turret Arms compatible with Hypro, Teejet, Arag and other ISO Square Lug Nozzle Quick Attach Caps Green Stem Seal and Green Diaphragm indicate Viton Seals for Hypro Nozzle Bodies FEATURES- 5-way Turret with...

Direct replacement for major OEM 5-way Nozzle bodies for 1"(1.351"OD) boom pipe 10mm (3/8") stem/portsize Square Lug Turret Arms compatible with Hypro, Teejet, Arag and other ISO Square Lug Nozzle Quick Attach Caps Green Stem Seal and Green Diaphragm indicate Viton Seals for Hypro Nozzle Bodies FEATURES- 5-way Turret with...

Direct replacement for major OEM 3-way Nozzle bodies for 1/2" boom pipe 10mm 3/8" stem/port size Square Lug Turret Arms compatible with Hypro, Teejet, Arag and other ISO Square Lug Nozzle Quick Attach Caps Green Stem Seal and Green Diaphragm indicate Viton Seals for Hypro Nozzle Bodies FEATURES- 3-way Turret...

Direct replacement for major OEM 3-way Nozzle bodies for 3/4" boom pipe 10mm 3/8" stem/port size Square Lug Turret Arms compatible with Hypro, Teejet, Arag and other ISO Square Lug Nozzle Quick Attach Caps Green Stem Seal and Green Diaphragm indicate Viton Seals for Hypro Nozzle Bodies FEATURES- 3-way Turret...

Have a tight spot that requires your nozzle body Check valve be on the Left hand side instead of the Right hand side? Well this is it. 5-way Pro-flow nozzle body with a left hand check alve (the opposite of Hypro's usual right hand check valve. featuring viton seals. Square Lug quick...

Pro-flow Nozzle Body 3-Way EPDM 8psi DCV With Tab For Boom Clamp 1" Hypro ProFlo nozzle bodies are designed to deliver the highest flow rates across the spraying pressure range. These turret bodies have a mounting tab for easy installation on a dry boom. 3-way allowing you to select spray performance with...

This seal is used to seal the nozzle body port from the boom piping

This Seal is for the nozzle body port to boom line interface. It is Viton (green)

NOZZLE BODY NOT INCLUDED ProStop Features: Rapidly and accurately start and stop nozzle flow using a self-propelled sprayer’s existing on-board air Fail-safe operation with a normally closed, pressurize-to-spray control and positive shut-off for transport and storage Operate using as low as 40 psi (3 bar) pneumatic signal to control sprays at pressures...

Pro-Flow 3-Way 1" EPDM LH DCV Nozzle Body

Replacement Seal/O-Ring Kit for ProFlo Body Includes all internal seals/Viton

Pro-Flow 3-Way 1" Viton LH DCV Nozzle Body

Pro Flow 3-way carousel style nozzle body 3/4" split clamp 8psi dcv. Square Lug quick attach design works with standard Hypro, teejet, Arag square lug quick attach nozzle caps.

FEATURES- Three turret styles for an easy change of spray nozzles: single, 3-way, and 5-way- Provides lowest pressure drop at any given flow in the industry- 2.6 gpm (9.84 LPM) with a 5 psi (.345 BAR) pressure drop- Positive shutoff between each spray position BENEFITS- Designed to deliver the highest flow rates...

Add this check valve to turn flow on or off at a nozzle body. Fits all Hypro Style nozzle Bodies with a DCV Diaphragm Check Valve. Pentair’s Hypro ProStop-E provides instantaneous on/off control with 12 volt actuation, eliminating misapplications and waste. The valve utilizes a robust, quarter-turn electric ball valve that is highly...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 LH 21/32" (17mm) High Flow No Modules -Turret 4-Combojet quick attach...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 RH 21/32" (17mm) High Flow No Modules -Turret 4-Square lug quick...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 LH 21/32" (17mm) High Flow No Modules -Turret 4-Square Lug quick...

Fits John Deere 17mm Port Size. If you have factory installed John Deere High Flow or Stainless Steel Plumbing. You have a 17mm port size for the jumbo nozzle bodies. These 17mm express ends are the ones you need. Conventional boom designs trap air in the boom causing a delay from the...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 RH 21/32" (17mm) High Flow with one Manual Shutoff Module on...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 RH 21/32" (17mm) High Flow No Modules -Turret 4-Combojet quick attach...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 RH 21/32" (17mm) High Flow with one Manual Shutoff Module on...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 LH 21/32" (17MM) High Flow Manual Shutoff located on RH Side...

Commonly Used on New Holland Guardian Front Mount Sprayers For Boom Pipe Size 1" (1.315" O.D) Turret Outlets-3 Plus Single Outlet Single Outlet- Manual Chem Saver Check Valve Turret Outlets- Standard Chem Saver The QJS-D turret series nozzle body utilizes a modular design that allows for highly customized solutions to best...

Commonly Used on New Holland Guardian Front Mount Sprayers For Boom Pipe Size 1" (1.315" O.D) Turret Outlets-5 Plus Single Outlet Single Outlet- Manual Chem Saver Check Valve Turret Outlets- Standard Chem Saver The QJS-D turret series nozzle body utilizes a modular design that allows for highly customized solutions to best...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 LH 21/32" (17MM) High Flow Manual Shutoff located on RH Side...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 RH 21/32" (17mm) High Flow Single MSO on SIngle outlet No...

The QJ370 multiple outlet nozzle body features a compact design to fit onto a variety of sprayers and boom designs. It has positive indexing that prevents accidental rotation and provides feedback to the operator. Optimized internal passages provide high flow rates for a wide range of ground speeds and application rates QJ375 Flow...

The DS41 nozzle body is the next generation of compact nozzle body. Many significant design changes have been made to improve turret position, durability and strength, and reliability in some of the most challenging environments in spraying ComboJet 4+1 RH 21/32" (17mm) High Flow Single MSO on SIngle outlet No...

Does Not Include 17mm High Flow Nozzle Body or 1/2" Stem Elbow Fits all 1 inch boom lines with 17mm port size for nozzle body stems which are typically found on John Deere Factory Stainless Steel Boom Lines. Conventional boom designs trap air in the boom causing a delay from the close...

Compact Jet Nozzle Body for 3/4" Pipe, 3-Way EPDM 8psi DCV With Tab For Boom Clamp Arag Compact Jet- nozzle bodies are designed to deliver the highest flow rates across the spraying pressure range. These turret bodies have a mounting tab for easy installation on a dry boom. 3-way allowing you to...

The Hypro 3430-0754 Internal Seal Kit contains authentic factory seals used to service ProFlo Three and Five-Way Nozzle Bodies.

Works with 1" boom pipe 17mm (11/16") port size. Will replace John Deere AN206621 Nozzle Body. Please note diaphragm check valve size is slightly different so any check valve adaptors for pwm systems such as capstan or Hawkeye that work with the John Deere version will not work with the...

Fits all 1 inch boom lines with 10mm port size for nozzle body stems which is industry standard. Conventional boom designs trap air in the boom causing a delay from the close signal to when spray actually stops. Pentair's Hypro Express nozzle body end caps include a passive feature that eliminates the trapped...

Beluga 45° Anvil Tube End Nozzle Holder Complete with Cap Seal, Ball Valve and Anti Twist Device (Does Not Include Beluga Hose Drop or Nozzle) Sprayers101 Article Beluga Performance in Corn The Beluga HoseDrop is a customizable spraying system designed to spray between rows and inside the crop canopy. It combines...

3/8" PTC to Nozzle Cap ISO Quick Attach Lug Attaches to an ISO nozzle body lug (teejet, Hypro, Arag) and can be used with 3/8" OD Tubing for a quick connection. Also handy for fence row nozzle kits. Commonly used in starter fertilizer application systems, Push-to-Connect Caps allows the user to...

1/4" PTC to Nozzle Cap ISO Quick Attach Lug Attaches to an ISO nozzle body lug (teejet, Hypro, Arag) and can be used with 1/4" OD Tubing for a quick connection Commonly used in starter fertilizer application systems, Push-to-Connect Caps allows the user to insert a flow regulating disc for precision.

Beluga Hose Drop 36" Anvil End DT2.0 Nozzle With Mounting Bracket/Hardware *Beluga Spray Heads, Slides and Nozzles must be ordered separately. Sprayers101 Article Beluga Performance in Corn The Beluga HoseDrop is a customizable spraying system designed to spray between rows and inside the crop canopy. It combines lightweight flexible hosedrops with...

Beluga Hose Drop 36" Anvil End DT1.0 Nozzle With Mounting Bracket/Hardware *Beluga Spray Heads, Slides and Nozzles must be ordered separately. Sprayers101 Article Beluga Performance in Corn The Beluga HoseDrop is a customizable spraying system designed to spray between rows and inside the crop canopy. It combines lightweight flexible hosedrops with...

Beluga Hose Drop 36" Anvil End DT3.0 Nozzle With Mounting Bracket/Hardware *Beluga Spray Heads, Slides and Nozzles must be ordered separately. Sprayers101 Article Beluga Performance in Corn The Beluga HoseDrop is a customizable spraying system designed to spray between rows and inside the crop canopy. It combines lightweight flexible hosedrops with...

The Wilger FS3 Combo-Jet 3 Stream Fertilizer Nozzle is the ideal choice for efficient and precise fertilizer application. Compatible with Combo-Jet Nozzle Bodies and featuring an all in one nozzle, orifice and o-ring assembly providing exacting flow control for more accurate placement and minimized leaf burn. Works directly with Combo-Jet Radial...

QUICKLY FIND WORN SPRAY NOZZLES TIPS Industry guidelines recommend tip replacement once flow rate exceeds that of a new tip by 10% One year warranty Provides quick and accurate flow rate checking of individual sprayer nozzles. This model is best for flow rates below 2.25 GPM typical of herbicide and insecticide...

-Diffuser with holes to allow for finer and wider micronebulisation. On the base of the diffuser there is a ring nut that allows the diffuser to be locked in any position. Crucial is the choice of nozzle diameter, as depending on the diameter and pressure of the pump, the nozzle or...

Agrifac to Combo-Jet Adapter SleeveThe sleeve adapter snaps into any Combo-Jet spray tip to allow seamless adaptation to the proprietary Agrifac nozzle body outlet Adapter sleeve acts as a dust curtain around the outlet, reducing chemical & grime build-up Sleeve centers outlet on o-ring seal & orients nozzle pattern to 10°...

This Kit Is Essential for Installation of Express End Caps Use this SKU 3410-044 for all 1" poly lines and 1" Stainless lines with a 10mm port size (pretty much any 1" line except for John Deere High Flow 1" Stainless Plumbing) Kit includes machinist-quality drill bit, drilling and cutting jig...

1/2" PTC Stem Elbow is Available to direct rinse flow away from boom. Fits all 1 inch boom lines with 10mm port size for nozzle body stems which is industry standard. Conventional boom designs trap air in the boom causing a delay from the close signal to when spray actually stops. Pentair's...

Stainless Steel Plug For Beluga Hose Drop The Beluga HoseDrop is a customizable spraying system designed to spray between rows and inside the crop canopy. It combines lightweight flexible hosedrops with a unique low-profile nozzle body to be used in applications such as fertilizer sidedress, herbicide banding, or subcanopy crop spraying. The...