Free Shipping in Canada For Orders over $200-------------Save 5-35% On Nozzles Even Mix & Match ---------- Free Shipping to Continental USA On orders over $500 (some restrictions apply)

3D Nozzles Fast Cap 100deg

Product Description
$9.52 CAD $13.97 CAD
Maximum quantity available reached.

Non- Air Induction Design Suitable for PWM Systems at 30hz PWM operating below 30hz all nozzles should point in the same direction.

Nozzle Ninjas Take On The 3D Nozzle

Great choice for Vertical target coverage and Fungicide application

The 3D Nozzle Excels at Coverage. Especially for coverage of vertical targets. The 3D has gotten a bad rap for being driifty. This can be true but if you are looking for a drift resistant droplet size and pattern with excellent coverage it is possible to find in the 3D Family just not above 40psi or in the smaller flow rates.

The 3D pattern is consistent and tight down to near 15psi we recommend sizing the 3D nozzle half to one size larger than what you normally would and operate in a psi range of 20-40 psi with a consistent boom height between 18 and 26 inches. 

In sizes brown .05gpm and larger the 3D can operate at pressures above 40psi  and can produce excellent results for cereal and canola fungicide applications especially when installed in alternating spray directions on the boom. 

FEATURES

Designed in partnership with Syngenta using wind tunnel research and more than 10 years of agronomic field trials


Proven to deliver up to a 10% increase in pre-emerge weedcontrol compared to a conventional flat fan (Syngenta UK Trials - 0.6 l/ha Liberator (diflufenican+ flufenacet) + 4 l/haDefy (Prosulfacarb) applied November 2015)


Creates the optimum droplet size for coverage, fewer droplets bounce off or drift away
60-75% drift reduction compared to flat fan nozzles, achieving 2 Star LERAP rating at specific nozzle size/pressure combinations


Inclined spray is designed to be installed alternating forward and backward on boom to provide 3-dimensional coverage on vertical targets such as grass weeds, soil clods and broad leaved canopies


PWM compatible; Install 3D nozzles facing the same direction when using with PWM systems at less than 30 Hz


FastCap version utilizes the SnapLock cap technology, reducing installation torque requirement by 73% (Internal testing - standard FastCap versus SnapLock cap)

Can Also be ordered Nozzle only

Nozzle Ninja Non-Air Induction Performance Chart

 PWM Application Chart 20 inch Spacing

PWM Application Chart 15 inch Spacing

SPRAY IT NOZZLE CALCULATOR

 

 

 

Sku: FC-3D100-015
Vendor: Hypro

Related products  

x