The new M350 pump saves money in spraying operations.
Hydraulic motor Specifications-HY11131A
Max HYD Pressure:3000 PSI
Max Speed: 3600 RPM
Max HYD Flow: 11gpm
Typical HYD Pressure: 200-2600psi
Port Sizes:
Inlet Port SAE 10 (7/8-14UNF-2B)
Outlet Port SAE 10 (7/8-14UNF-2B)
Case Drain Port SAE 04 (7/16-20UNF-2B
Connection Information: “A” Port – To Tank (Outlet) “B” Port
– Pressure (Inlet) Case Drain Port
– To Tank (Outlet)
• Because this is a bi-directional motor, reversing “A” and “B” ports will not damage the motor. No check valve is required.
• Case drain must not be restricted. Back-pressure above 4.3 psi may damage motor seals.
M350 FastFlow™ technology utilizing a customized diffuser design greaty increases flow rates. With performance over 500 gallons per minute (Plumbed 4" Suction) , you'll spend less time filling, which means less downtime in the field and most importantly, less cost per acre.
Patented tandem wet seal design:
- Produces less wear
- Prevents seal breakage from high pressure clean out
- Eliminates eight leak points
- Works with natural system pressure to keep seal intact
- Withstands over one hour of dry run
3" Plumbing 450gpm
4' Plumbing 515gpm
M300 Inlet and Outlet
Does not include Chamber Fluid (Glycol) for Wet Seal
- 500+ Gallons per Minute
- Polymer components molded from polypropylene
- EPDM seals
- All stainless steel hardware
- Tandem wet seal design
Produces less wear
Prevents seal breakage from high pressure clean out
Eliminates eight leak points
Works with natural system pressure to keep seal intact
- No exposed moving parts
- Typical operating speed: 3600 RPM
- Run dry capability of greater than one hour.
- Capable of handling occasional solid particles in suspension up to ½" in diameter.
- Maximum self-priming height 25 ft (7.6 m) for hydraulic version
(0.422" priming hole); 28 ft (8.5 m) for standard version (0.250" priming hole)
