Free Shipping in Canada For Orders over $200-------------Save 5-35% On Nozzles Even Mix & Match ---------- Free Shipping to Continental USA On orders over $500 (some restrictions apply)
Reach Out to the Nozzle Ninja
Welcome to Nozzle Ninja!
FEATURES- Three turret styles for an easy change of spray nozzles: single, 3-way, and 5-way- Provides lowest pressure drop at any given flow in the industry- 2.6 gpm (9.84 LPM) with a 5 psi (.345 BAR) pressure drop- Available in wet or dry boom versions- Positive shutoff between each spray position
BENEFITS- Designed to deliver the highest flow ...
Three turret styles for an easy change of spray nozzles: single, 3-way, and 5-way• Provides lowest pressure drop at any given flow in the industry• 2.6 gpm (9.84 LPM) with a 5 psi (.345 BAR) pressure drop• Available in wet or dry boom versions• Positive shutoff between each spray position
Designed to deliver the highest flow rates across the spr...
Works with 1" boom pipe 17mm (11/16") port size. Will replace John Deere AN206621 Nozzle Body.
Ideal for high speed treatments, high volume applications and liquid fertilizers.
Positive shut-off within each spray position.
Maximum working pressure 10 bar (145 PSI)
Flow rate 23 l/min at 0.35 Bar (6 GPM at 5 PSI)
Check valve ...
Have a tight spot that requires your nozzle body Check valve be on the Left hand side instead of the Right hand side? Well this is it. 5-way Pro-flow nozzle body with a left hand check alve (the opposite of Hypro's usual right hand check valve. featuring viton seals.
- Three turret styles for an easy change of spray nozzles: single, 3-way, and 5-way
- Provides lowest pressure drop at any given flow in the industry
- 2.6 gpm (9.84 LPM) with a 5 psi (.345 BAR) pressure drop
- Available in wet or dry boom versions
- Positive shutoff between each spray position
- Designed to deliver the highes...
Pro-flow Nozzle Body 3-Way EPDM 8psi DCV With Tab For Boom Clamp 1"
Hypro ProFlo nozzle bodies are designed to deliver the highest flow rates across the spraying pressure range. These turret bodies have a mounting tab for easy installation on a dry boom. 3-way allowing you to select spray performance with a twist of the wrist.
Use with a push to connect adapter in a fence row kit or on its own. Fits 1" Boom lines.
0.25 inch Male pipe thread to Quick attach ISO Nozzle Bayonet with 8psi DCV EPDM
Pro Flow 3-way carousel style nozzle body 3/4" split clamp 8psi dcv
Pro Flow 3-way carousel style nozzle body 1" split clamp 8psi dcv
This Seal is for the nozzle body port to boom line interface. It is Viton (green)
Standard ISO Quick Tach Bayonet
8 psi DCV
0.75 inch wet boom line
Use this to attach your fence row body to and prevent dripping with the included diaphragm Check Valve
NOZZLE BODY NOT INCLUDED
Rapidly and accurately start and stop nozzle flow using a self-propelled sprayer’s existing on-board air
Fail-safe operation with a normally closed, pressurize-to-spray control and positive shut-off for transport and storage
Operate using as low as 40 psi (3 bar) pneumatic signal to control sprays at p...
This seal is used to seal the nozzle body port from the boom piping
1/2" Wet Boom Nozzle Body ISO Bayonet No DCV
3/4" Wet Boom Nozzle Body ISO Bayonet No DCV
1" Wet Boom Nozzle Body ISO Bayonet No DCV
1/4"MNPT to nozzle Quick Attach
Single Fence Row Nozzle Nody 0.25 inch FNPT to Bayonet Commonly used for End row/Fence row Nozzles
Swiveling ball allows flexibility for end row applications as well as set up of smaller sprayers
Nozzle attaches to ball's 1/4 inch FPT
Nozzle holder uses 1/4 inch MPT to attach to solution supply