- Home
- FLANGE PLUG 1 IN threaded .25 inch FPT
FLANGE PLUG 1 IN threaded .25 inch FPT
Related Products
Guardian Air Nozzles

Guardian Air Nozzles
$9.75 CAD
The Nozzle Ninja's Take:Guardian Air (GA)/Low Drift Air (LDA) The Guardian Air is a proven performer. An excellent combination of coverage and drift control. if you are looking for one nozzle that can do it all and provide consistent operation in a wide pressure window the Guardian Air or as some Deere people may call it the LDA Low drift Air is...
Guardian Air Twin

Guardian Air Twin
$10.98 CAD
Nozzle Ninja's Take on the Guardian Air Twin (GAT) Take the qualities of the Guardian Air and combine it into a one piece design with dual outlets spraying 20 degrees forward and back. That is the GAT. The revised housing is durable and does not fall apart like earlier versions of the GAT and allows for the use of a twin spray nozzle without the...
WATER SENSITIVE CARD 1"X3" 50 PACK

WATER SENSITIVE CARD 1"X3" 50 PACK
$39.00 CAD
Use this water Sensitive paper to get a visual confirmation of the spray quality to test different configurations to get the most out of your investment in application technologies
Ultra Lo-Drift 120 deg Nozzles

Ultra Lo-Drift 120 deg Nozzles
$10.55 CAD
Nozzle Ninja's Take on the Ultra Low Drift (ULD) Bread and Butter, Workhorse, Veteran Pro, these could all be used to describe the ULD. It has been around for a long time and delivers exactly as advertised. Drift reduction and coverage. The ULD performs best from 50psi to 80 psi but holds its pattern width well down to 25 psi. The unique feature...
Standard Fan Nozzle Cap With EPDM Seal

Standard Fan Nozzle Cap With EPDM Seal
$0.83 CAD
Fits Hypro Nozzle Families ULD, GA, LD,VP, TR, OC, F, E, AXI, ADI, OCI ISO Colours Available please select Desired Colours
Express End Manual Flush Valve Retrofit

Express End Manual Flush Valve Retrofit
$51.00 CAD
This Valve replaces the cap in an existing express end to quickly flush the boom section without using tools. -Compact valve design limits the length it extendsbeyond the last nozzle body to fit most boom structures-Chemically-resistant, stainless steel ball and viton o-rings extending life-Handle includes standard wrench square head slot to ope...
Express end cap Standard Flow 10mm

Express end cap Standard Flow 10mm
$49.00 CAD
Fits all 1 inch boom lines with 10mm port size for nozzle body stems which is industry standard. Conventional boom designs trap air in the boom causing a delay from the close signal to when spray actually stops. Pentair's Hypro Express nozzle body end caps include a passive feature that eliminates the trapped air by allowing the air to escape t...
Pump Seal Kit Hypro 9300 Series Cast Iron and Stainless

Pump Seal Kit Hypro 9300 Series Cast Iron and Stainless
$185.00 CAD
Material:The Life Guard seal utilizes silicon carbide (SiC) for its seal surfaces(primary ring and mating ring). This is more abrasion resistant thanthe carbon graphite and ceramic used in standard seals. SiC alsoruns cooler if the pump is run dry, improving the life of the seal.Mating Rings:The O-ring style of the Life Guard seal mating ring al...
3D Nozzles Fast Cap 100deg
3D Nozzles Fast Cap 100deg
$8.99 CAD
Non- Air Induction Design Suitable for PWM Systems at 30hz PWM operating below 30hz all nozzles should point in the same direction. FEATURES Designed in partnership with Syngenta using wind tunnel research and more than 10 years of agronomic field trials Proven to deliver up to a 10% increase in pre-emerge weedcontrol compared to a conventional ...
CERAMIC ADI Low Drift 110deg

CERAMIC ADI Low Drift 110deg
$8.19 CAD
Pre-Orifice Drift Reducing Ceramic Insert Suitable for PWM Applications. Can be used with a twin Cap Nozzle holder to create mixed droplet sizes. The Albuz ADI anti-drift spray nozzle provides a versatile balance of drift reduction and target coverage. The proven pre-orifice design creates droplets that are well suited for a wide range of spray ...
Pro Flow Nozzle Body 5-way 1" Viton

Pro Flow Nozzle Body 5-way 1" Viton
$14.90 CAD
FEATURES- Three turret styles for an easy change of spray nozzles: single, 3-way, and 5-way- Provides lowest pressure drop at any given flow in the industry- 2.6 gpm (9.84 LPM) with a 5 psi (.345 BAR) pressure drop- Available in wet or dry boom versions- Positive shutoff between each spray position BENEFITS- Designed to deliver the highest flow ...
Express end Cap Standard 10mm install kit

Express end Cap Standard 10mm install kit
$130.00 CAD
This Kit Is Essential for Installation of Express End Caps Use this SKU 3410-044 for all 1" poly lines and 1" Stainless lines with a 10mm port size (pretty much any 1" line except for John Deere High Flow 1" Stainless Plumbing) Kit includes machinist-quality drill bit, drilling and cutting jig for 1 inch pipe, Emery cloth, and instructions to re...